Description
RCV-62C-SP
The Republic RCV-62C-SP Rotary Claw Vacuum Pump is a high efficiency dry rotary claw pump capable of ~28in HgV at flows of 42cfm. The RCV-62C-SP is engineered with a compact design and minimal footprint. This claw pump is ideal for applications where continuous, or semi-continuous, deep vacuum is required at high efficiencies. Republic’s RCV-62C-SP Rotary Claw Vacuum Pump has minimal maintenance requirements; the non-contact design of the claws ensures low wear and tear, resulting in extended service intervals, reduced down-time, and lower maintenance costs.
| FEATURES | ADVANTAGES |
|---|---|
| • Single stage, direct-driven | • Robust & efficient performance |
| • Continuous, contactless, oil-free operation | • Energy efficient |
| • Energy efficient for substantial savings | • Contact free |
| • Minimal downtime | • Steady performance |
| • Air-cooled, no water required | • Virtually no maintenance |
| • Simple installation | • Minimal downtime |
| • Virtually maintenance-free | |
| • Low noise levels | |
| • Integrated check valve and vacuum regulator |
| WORKING PRINCIPLE | |
|---|---|
| Rotary claw vacuum pumps are dry, positive displacement pumps consisting of a pumping chamber (2) and two counter-rotating, synchronized, non-contacting claws (3). The gas enters through the inlet (1) and is filtered by the inlet screen. As it proceeds into the pumping chamber (2), the precisely-dimensioned claws (3) rotate. The small gap between the claws compresses the gas such that the pressure on the discharge side is higher than the inlet. The oil-free gas finally discharges through the silencer (4). |
 |
| Model | A | B | C | D | E | Inlet/Outlet |
|---|---|---|---|---|---|---|
| RCV-62c | 29.8” | 12.6” | 18.2” | 9.7” | 5.7” | 1.00” NPT |
| RCV-62c-SP | 29.8” | 12.6” | 18.2” | 9.7” | 5.7” | 1.00” NPT |
